AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
For ios instal WiFi Router Master1/31/2024 ![]() ![]() ![]() Select the required Wi-Fi network and tap Next.Tap Yes, I’m in to improve the user experience.When you hear the sound from a device connected to NAD CS1, tap Yes.Choose the required home environment and tap Next.On the iOS device, tap the Google Home app.Once the WiFi setup is complete, tap Done.Note: To connect to other WiFi networks, select Show Other Networks. The App discovers the WiFi network – currently connected by the iOS device.The complete 12-digit MAC address is printed on a sticker on the bottom panel of the device. *Note: xxxx is the last four digits in the MAC (Machine Access Control) address (example: NAD-CS1d0d3). Scroll down to select NAD-CS1xxxx* under SET UP NEW AIRPLAY SPEAKER… On the iOS device, tap the Settings App.Note: Press the Standby button for more than 5 seconds to place NAD CS1 in Hotspot Mode. NAD CS1 should be in Hotspot Mode (Power Indicator LED alternates Green and Red). Wireless Accessory Configuration (WAC).You can connect NAD CS1 to the wireless network using any of the following methods: If you must use the wired connection, connect NAD CS1 directly to the router or home network using the Ethernet cable.Ī wireless connection allows you to place NAD CS1 anywhere in the home but does require some setup. The Common connection types of regular ISPs we collected is for reference only.The following methods help you connect NAD CS1 to the home network.Ī wired connection to the network is simple and requires no setup. Select the connection type such as PPPoE, Dynamic IP, and Static IP, and fill in VLAN ID if ISP required, which generally provided by ISP. The location will be also used as this Deco’s name.ġ2. In case it fails to find the Deco in this step:ġ) Make sure the smartphone supports Bluetooth 4.0 or later.Ģ) Switch to another smartphone and restart the onboarding process.ġ1. Your smartphone will attempt to find and link to the Deco. Just wait for about 2 minutes until the LED turn to pulsing blue and go on.ġ0. Note: If the LED is not pulsing blue, press the RESET on Deco for one second, the LED will turn to yellow. Turn on Bluetooth on your phone and wait until Deco’s LED light pulses blue. Wait for the ‘Internet’ light to be stable on your modem.ĩ. ![]() Connect one of your Deco units to your modem and power on both devices.Ĭonnect Ethernet cable to your Deco ’s one of the WAN/LAN ports from the modem/modem router like Pic 1 or the Ethernet port on the wall like Pic 2. Power off your modem and remove the backup battery if it has one.ħ. Once you verify you have everything, go to the next step.Ħ. Note: If you already have a TP-Link Cloud account, you can log in with your account.ĥ. Log in or sign up to set up a TP-Link ID. Install the Deco app on your Android or iOS smartphone or tablet.Ģ. Go to Google Play or the App Store to download the Deco app. The Deco can only be set up through the Deco app, which is available on Android and iOS.ġ. For iOS14 and above, enabling the Local Network is a MUST to complete the configuration process.ģ. To make sure the setup process can carry on smoothly, please disable the Power-Saving mode on the phone.Ģ. All steps and images described here are only examples and may not reflect your actual Deco experience.ġ. Note: Features available in Deco may vary by model and software version. ![]()
0 Comments
Read More
Leave a Reply. |